Clean brass cartridge casings load easier, keep the inside of reloading dies cleaner, and may even help your barrel last longer. Brass collected up off the ground almost always has some manner of dirt attached to it and, depending on the specific shooting range, that will cause more or less concern. For example if it’s sand, this debris can do serious damage to a die (and rifle barrel). There will also always be a firing residue, if not on the case, it will be inside the case, and within this will also be primer residue, which is very abrasive.
Brass cartridge casings don't have to be shiny to be clean. as long as you get down to the bare metal that’s normally “clean” enough.
Designed for use with the RCBS Ultrasonic Case Cleaner, the new Ultrasonic/Rotary case cleaning solution quickly removes tarnish, carbon buildup an...
View full details
Use the RCBS Decapping die to quickly remove primers from cases from cases prior to cleaning. The Decap Die .22 - .25 will handle most cases. Note:...
View full details
Save 10%
All the tools you need in one package for removing dirt and powder residue from the inside of case necks and primer pockets. Kit comes complete wit...
View full details
Save 10%
Redding optional decapping die rod for .17 thru .20 calibre cases. This optional rod will also accommodate the small .060 inch flash holes found on...
View full details
Save 10%
Replacement decapping die rod for the Redding Small Universal Decapping Die.
Save 9%
Clean dirt and powder residue from inside case necks with the Redding case neck brushes. Suitability: .35 to .45 Calibre
Save 10%
A replacement decapping rod to fit the Redding Large Universal Decapping Die. Also includes C-clip.
Save 10%
Decapping dies allow you to de-prime and clean your cases prior to re-sizing. The Redding large decapping die will handle 22 thru 50 calibre cases ...
View full details
Save 9%
Clean dirt and powder residue from inside case necks with the Redding case neck brushes. Suitability: .270 Centrefire to .30 Calibre
Save 9%
Clean dirt and powder residue from inside case necks with the Redding case neck brushes. Suitability: .22 Centrefire to .25 Calibre
Save 10%
Decapping dies allow you to deprime and clean your cases prior to sizing.This small decapping die will handle .22 thru .50 calibre cases with lengt...
View full details
Save 10%
Decapping dies allow you to deprime and clean your cases prior to sizing. The small decapping die will handle 22 thru 50 calibre cases with lengths...
View full detailsIn short order, separate the cleaned cases from cleaning media. Merely empty the cases and media from the case tumbler into the separator basket. W...
View full details
An optional decap rod assembly for the Sinclair Decapping Die to suit 17 and 20 calibre cases. Decap pins are standard Hornady headed pins.
The Sinclair Accessory Handle is suitable for case prep accessories and 8-32 threaded case neck brushes. Its anti-fatigue design is large enough to...
View full details
This useful accessory accepts most 8-32 threaded nylon case neck brushes and helps to effectively and efficiently get dirt and powder residue off t...
View full details
Frankford Arsenal® Stainless Steel Media Pins are ideal for rotary tumbling brass. When combined with a liquid solution they deliver unmatched clea...
View full details
