K+M Shooting

These Forster neck turning pilots are used on the Forster Case Trimmer to turn concentric and uniform necks easily and accurately. Note: These pilots

The K+M Expand Mandrel Holder (EXMH) allows the installation of PowerStroke Expand Mandrels in tight working areas (co-ax and progressive presses). T

K+M PowerStroke™ version 2 (v2) Press Adapters (Patent Pending) are a significant advancement from K&M's Version 1 (v1) by adding multiple radial hol

K+M PowerStroke™ version 2 (v2) Press Adapters (Patent Pending) are a significant advancement from K&M's Version 1 (v1) by adding multiple radial hol

These K+M replacement neck turner cutters are made out of carbide and ground to the correct dimensions. Replacement cutters for the K+M case neck tur

These Collets work in the K+M ergonomic Case Holder . Secure a wide range of cases for primer pocket work (head-facing) and, for most rimless cases,

The K+M Case Holder makes holding cartridge cases securely a breeze. Case preparation requires the repetitive holding of cartridge cases. Small diame

The K+M Case Holder Power Adapter and Handle is used to hold the cartridge whilst neck turning. The Adapter has 1/4" hex standard shaft while the ret

In cartridge manufacturing, the flash hole is "punched" into the brass. While this is the least expensive method, it has many shortcomings and incons

In cartridge manufacturing, the flash hole is "punched" into the brass. While this is the least expensive method, it has many shortcomings and incons

This rugged left-handed arbor press is used with in line bullet seating and neck sizing dies and can be used at your home loading bench or at the sho

An improvement to a long standing superb case mouth chamfering tool with a newly designed handle that provides improved depth stop fingers and a much

K+M Case Mouth Tapered Reamer - An improvement to a long standing superb case mouth chamfering tool with a newly designed handle that provides improv

This special K+M Expander Mandrel is designed to expand a 6mm case necks up to .30 calibre in 1 stroke. It is recommended that a high lubricity lubri

Use the K+M standard force pack option with .001" resolution dial indicator. Each .001" increment equals 1lb of force. Force range is 0-150lbs.

These K+M replacement neck turner cutters are made out of heat treated tool steel that is ground to the correct dimensions. Replacement cutters for t

This is the replacement flash hole cutter for the K+M Professional Flash Hole Uniformer. This one is designed for standard cases with a .080" flash h

This is a replacement flash hole cutter for the K+M Professional Flash Hole Uniformer. This one is designed for "PPC" cases with the .062" flash hole

The K+M Flash Hole Uniformer over comes some of the most detrimental affects on accuracy. In cartridge manufacturing, the flash hole is "punched" int

The K+M Flash Hole Uniformer over comes some of the most detrimental affects on accuracy. In cartridge manufacturing, the flash hole is "punched" int

In cartridge manufacturing, the flash hole is "punched" into the brass. While this is the least expensive method, it has many shortcomings and incons

The K&M Primer Seat Tool with Dial Gauge If you want the ultimate in hand priming tools – the K+M Primer Deluxe will fit the bill. Benchrest Shooters

Small Pistol & Small Rifle set to 0.122" depth Designed with a drive shank to be used with your cordless screwdriver and/or either of K+M's handles.